Товар
Diamond VeAl double-sided diamond bar (S) 10/7-5/3 (OSB) 100%
In Stock: 1
Length of the abrasive: 150 mm
Abrasive width: 24 mm
Abrasive thickness (without the blank): 12 mm
Applied cutting fluid: Oil
All Featuresweight: 120 g
length: 19 cm
width: 12 cm
height: 5 cm
- Description
- Features
- Reviews
All description
Venevsky diamond factory premium series bar on a flat aluminum plate. The abrasive layer on this plate is not sintered, but glued to the plate body. Already out of the box such a bar is ready to work, it does not require leveling on silicon carbide. The sharpening stone is suitable for finish sharpening.
The 10/7 side is made on a new upgraded OSB bond. The difference between the OSB bond and others is that it does not use boron carbide. In addition, the abrasive layer on it is not sintered, but glued to the body of the metal plate. The absence of unnecessary inclusions of other abrasives makes it possible to do softer and finer work. OSB bonding is ideal for hard steel on small angles.
Side 5/3 is made with the new upgraded OSB bond. The difference between the OSB bond and others is that it does not use boron carbide. In addition, the abrasive layer on it is not sintered, but glued to the body of the metal plate. The absence of unnecessary inclusions of other abrasives makes it possible to do softer and finer work. OSB bonding is ideal for hard steel on small angles.
Stone size: 150x24x12mm.
Grain size 1 side: 10/7 microns.
Grain 2 side: 5/3 microns.
Diamond powder concentration: 100%
Diamond layer thickness: 1 to 2 mm
Organic bonding.
Because of production peculiarities, the width and length of the abrasive may deviate from the values specified in the description by up to 5%.
Recommendations for work: pwork on this bond can be both with soapy water and oil. The manufacturer himself recommends working with water or soapy water, but working with oil gives an excellent result in terms of cleanliness of the process itself, without leaving such a large amount of water suspension.
WARNING!The brushes require careful handling: do not press on the abrasive during sharpening (especially when sharpening the tip/ankle of a knife), do not allow the blade to come off the blade feed plane and do not drop the brush on a hard surface.
| Length of the abrasive | 150 mm | Abrasive width | 24 mm |
| Abrasive thickness (without the blank) | 12 mm | Applied cutting fluid | Oil |
| Abrasive material | Artificial diamonds | Bundle | Organic (phenol-formaldehyde) |
| Gritness | GOST 10/7 |
Total reviews
Persons recommended this product
Anonymous
Shopper
check_circle Verified
Shop owner replied
Anonymous
Shopper
check_circle Verified
Shop owner replied
There are no reviews yet.
Be the first to review “ ”
Thanks for your review!
Your feedback helps us improve our service.
Please log in to submit a review.
Don't have an account? Register here .




