Товар
Diamond sharpening stone TSPROF Alpha N SD81, 80/63 (180 grit), 12 mm
Pre-order 14 days
Description
The Alpha 80/63 (180 grit) narrow bar is designed for basic sharpening of the cutting edge. It is suitable for sharpening knives with an S-shaped cutting edge (recurve), blades with complex geometry as well as short blades of multi-purpose knives and multitools.
TSPROF Alpha is a unique rubber-bonded diamond bar that performs incredibly clean. Through a lot of experimentation, we have managed to achieve the perfect combination of bonding agent and optimal concentration of abrasive particles. As a result, the TSPROF Alpha runs very clean and has the highest wear resistance.
. The TSPROF Alpha can easily handle all steels up to 70 HRC. Each bar is thoroughly prepared and unopened, ensuring minimal variations in thickness within ±0.1 mm. The chamfers on the bar are uncovered to prevent sharp edges from damaging the knife.
. The TSPROF Alpha is glued to an aluminum blank that has 45° bevels to hold it securely in the abrasive holder. The blanks are anodized in red color*.
. The blanks are packed in individual blister packs.
Characteristics:
Length: 150 mm
Width: 12 mm
Thickness: 3 mm ± 0.15 mm
Rubber bonding: Rubber.
Because of manufacturing, abrasive width and length may vary up to 5% from the values specified in the description.
Owing to the peculiarities of the anodizing process, the shades of the blanks may differ slightly.
Recommendations for use: work with TSPROF sharpening oil is recommended.
WARNING. Gentle handling is required: do not press on the abrasive during sharpening (especially when sharpening the tip/point of a knife), do not allow the blade to come off the blade feed plane and do not drop the bar on a hard surface.
If a parasitic risk appears during sharpening, we recommend rubbing the abrasive on a frosted glass with water.
- Description
The Alpha 80/63 (180 grit) narrow bar is designed for basic sharpening of the cutting edge. It is suitable for sharpening knives with an S-shaped cutting edge (recurve), blades with complex geometry as well as short blades of multi-purpose knives and multitools.
TSPROF Alpha is a unique rubber-bonded diamond bar that performs incredibly clean. Through a lot of experimentation, we have managed to achieve the perfect combination of bonding agent and optimal concentration of abrasive particles. As a result, the TSPROF Alpha runs very clean and has the highest wear resistance.
.
The TSPROF Alpha can easily handle all steels up to 70 HRC. Each bar is thoroughly prepared and unopened, ensuring minimal variations in thickness within ±0.1 mm. The chamfers on the bar are uncovered to prevent sharp edges from damaging the knife.
.
The TSPROF Alpha is glued to an aluminum blank that has 45° bevels to hold it securely in the abrasive holder. The blanks are anodized in red color*.
.
The blanks are packed in individual blister packs.
Characteristics:
Length: 150 mm
Width: 12 mm
Thickness: 3 mm ± 0.15 mm
Rubber bonding: Rubber.
Because of manufacturing, abrasive width and length may vary up to 5% from the values specified in the description.
Owing to the peculiarities of the anodizing process, the shades of the blanks may differ slightly.
Recommendations for use: work with TSPROF sharpening oil is recommended.
WARNING. Gentle handling is required: do not press on the abrasive during sharpening (especially when sharpening the tip/point of a knife), do not allow the blade to come off the blade feed plane and do not drop the bar on a hard surface.
If a parasitic risk appears during sharpening, we recommend rubbing the abrasive on a frosted glass with water.