TSPROF Quick knife clamps with eccentric open a new level of convenience in sharpening. Clamping the knife in one motion¹ and no longer requires a screwdriver. The perfect solution for chefs and in-line knife sharpening. Registered in the FIPS Register of Inventions under the number 2024121892. Speed . The TSPROF Quick eccentric clamp allows to securely clamp knives with thicknesses from 1 to 7 mm and reduces the clamping time by a factor of 2². The ability to loosen the clamp quickly makes knife positioning much easier. Complex knife geometry is no longer a problem. FITNESS . No more screwdrivers are needed to clamp the knife! No need to find a place for a screwdriver on the table or search through all the drawers. All clamping is done with the clamping foot. To clamp knives of different thicknesses, simply adjust the distance between the clamping jaws with the clamping foot. Precise Calculation The design of TSPROF clamps is stress calculated using the finite element method. The material thickness and structural elements are designed so that the stresses are uniformly distributed along the length of the clamp. Uniform stress distribution results in uniform clamping of the jaws when clamping. Also the design of the clamp takes into account the increased requirements for wear resistance and friction force in the threaded connection, so especially for TSPROF Quick clamps the brass nut with increased³ wear resistance is made. SAFETY Most injuries during sharpening occur when hands are moving in the sharpening work area, including when clamping/unclamping the knife. Thanks to the new clamping method, the number of manipulations in the danger zone is reduced and the knife can be clamped and withdrawn from the clamps even with one hand. DURABILITY To reduce the wear of mating parts, the clamping foot in the clamp and the clamping foot itself have the same radius of rounding. This allows the clamping foot to “glide” over the clamping surface even during thickness adjustment, even under heavy load, thus maintaining its original appearance for a longer time. The clamp as well as the clamping foot are made of aircraft aluminum alloy of high strength. COMFORT Ergonomically designed clamping foot allows you to create high forces with light clamping (if you apply a force of 1.2 kg on the foot, the clamping force will be equal to 28.8 kg). The edges and edges of the foot are rounded, and the size is designed for maximum working comfort. STYLE . The unique clamp profile is calculated with mathematical precision and has perfect proportions, emphasizing a stylish appearance that will be the perfect finishing touch to your sharpening system. The dye anode layer gives the clamp foot a unique bright touch to complement the overall futuristic look of the clamps. TSPROF Quick clamps cover the task of clamping most knives, while featuring a unique comfortable design and providing a secure hold on the knife during sharpening with easy and simple clamping.
| Characteristics |
Value |
| Clamp length |
120 mm |
| Clamping width |
21 mm |
| Distance between jaws |
7 mm |
| Minimum angle |
11,5°* |
| Max. knife thickness at the edge |
7 mm |
| Number of clamps |
2 pcs. |
| Foot anodizing |
black |
¹ – after the clamp is adjusted to the required thickness ² – clamping of the knife of the same thickness, compared to solid milled clamps ³ – relative to the thread in aluminum * – when the thickness of the knife at the edge is 2,5 mm, outreach from the jaws of the clamp is 17 mm and the thickness of the abrasive is 4 mm. Suitable for all sharpening systems TSPROF Profile K03, TSPROF Kadet, TSPROF Pioneer. To attach the Quick clamps to the TSPROF Pioneer, you must use the screws from the “native” Pioneer clamps.
