Boride T2 F1200 stone, on the form

Boride is a well-known brand in the abrasives market, offering professional sharpening and polishing stones in different sizes and materials. In Boride’s assortment you can find abrasive stones for absolutely any kitchen knife, and forty years of experience of the company-manufacturer guarantees that sharpening and polishing tools of this brand will prolong the life of even the most fastidious blades for a long time.
The blue T2 series is made of aluminum oxide and uses a very hard bond.
Due to this it has high performance and a below average wear rate.
Boride recommends T2 as the best series for stainless steel work.

Stone size: 150X25X6mm (1/4*1*6″)
Grit: 1200 grit.
Material: Aluminum Oxide

On the working surface of the stone are allowed scuffs and light white streaks. They do not affect the work of the abrasive. Small chips are allowed, not affecting the working surface of the stone.

Small chips are allowed.

Recommendations for work: There are no special deviations from the general recommendations and regulations in sharpening with Boride T2 series stones and their maintenance. When sharpening, both oil-based and water-based coolants can be used. Stone cleaning is done in water, with a stiff brush and soap solution. Stones are leveled on a thick glass or mirror using silicon carbide powder.

Attention! Bar requires careful work: do not put pressure on the abrasive during sharpening (especially when sharpening the tip/ankle of the knife), do not allow tearing off the plane of the blade and falling of the bar on a hard surface.