Товар

Diamond bar with three-layer spraying 125/100

SKU TS-SH2000941

$17,23

Pre-order 14 days

Features:

Length of the abrasive: 150 mm

Abrasive width: 20 mm

Abrasive thickness (without the blank): 3 mm

Applied cutting fluid: Water

All Features

Description
Features
Reviews

Description

.
Diamond bar with three-layer overlay 125/100

All description

Diamond bar 125/100. Made on galvanic bond. Electroplated diamond stones provide intensive metal removal and can be used for knife cutting edges with significant damage (chips, gouges, etc.). They work noticeably more aggressively than organic and metal-bonded bars with similar grain size. This is achieved due to protruding diamond grains, while in metal and organic bonds diamond grains are embedded in the binder and mixed with it. The bar contains triple diamond sputtering. The diamond layer is located on both sides of the plate, with the same grain size on each side. The concentration of diamonds in the layer is 100%. The geometry of the working plane on both sides is even, the bar does not need leveling, the diamond layer is opened during work.

The bar is designed for rough sharpening of knives.

Characteristics:

Length:150 mm
Width:20 mm
Height: 3 mm
Powder granularity (microns): 125/100
Powder grade: AC15

Because of peculiarities of production, width and length of the abrasive may have deviations from the values specified in the description up to 5%.

Recommendations for use: Before starting work moisten the diamond layer of the bar with water. In the process of sharpening periodically rinse the diamond layer with clean warm water with a brush, do not allow salting. It is not intended to work with oil. After stopping work, clean from contamination, rinse in warm water. Store in a dry place.

WARNING!Bar requires careful work: do not put pressure on the abrasive during sharpening (especially when sharpening the tip/ankle of the knife), do not allow to break off the plane of the blade and drop the bar on a hard surface.

Length of the abrasive	150 mm	Abrasive width	20 mm
Abrasive thickness (without the blank)	3 mm	Applied cutting fluid	Water
Abrasive material	Artificial diamonds	Bundle	Galvanic
Gritness	GOST 125/100