Diamond sharpening stone TSPROF Alpha SD8, 7/5 (3000 grit)

The Alpha 7/5 (3000 grit) bar is designed for finishing the cutting edge
.

TSPROF Alpha is a unique rubber-bonded diamond bar that works incredibly clean. Through a lot of experimentation, we have managed to achieve the perfect combination of bonding agent and optimal concentration of abrasive particles. As a result, the TSPROF Alpha runs very clean and has the highest wear resistance.

.
The TSPROF Alpha diamond bars can easily handle all steels up to 70 HRC.

.
Each bar is thoroughly prepared and unopened, ensuring minimal variation in thickness within ±0.1mm.

The TSPROF Alpha abrasive blanks are glued to a 45° beveled aluminum blank for secure retention in the abrasive holder. The blanks are anodized in red color*.

.
The blanks are packaged in individual blister packs.

Characteristics:

Length: 150 mm

Width: 25 mm

Thickness: 3 mm ± 0.15 mm

Binding: rubber.

Because of production peculiarities, the width and length of the abrasive may deviate from the values specified in the description by up to 5%.

.
*Because of the peculiarities of the technological process of anodizing, shades of blanks may slightly differ

Recommendations for use: work with TSPROF sharpening oil is recommended.

WARNING!Bar requires careful work: do not put pressure on the abrasive during sharpening (especially when sharpening the tip/ankle of the knife), do not allow to break off the plane of the blade and drop the bar on a hard surface.

If a parasitic risk appears during sharpening, we recommend rubbing the abrasive on a frosted glass with water.