Diamond sharpening stone TSPROF Alpha SD61, 60/40 (240 grit)

The Alpha 60/40 (240 grit) bar is designed for basic sharpening of the cutting edge.

TSPROF Alpha is a unique rubber-bonded diamond bar that works incredibly clean. Through a lot of experimentation, we have managed to achieve the perfect combination of bonding agent and optimal concentration of abrasive particles. As a result, TSPROF Alpha work very clean and have the highest wear resistance.

.
The TSPROF Alpha diamond bars will easily handle any steel up to 70 HRC.

.
Each bar is thoroughly prepared and does not require opening, which ensures minimal variations in thickness within ±0.1 mm.

For reliable fixation in the abrasive holder TSPROF Alpha are glued to the aluminum blank, which has 45° bevels. The blanks are anodized in red color*.

.
The blanks are packed in individual blister packs.

Characteristics:

Length: 150 mm

Width: 25 mm

Thickness: 3 mm ± 0.15 mm

Bonding: rubber

Because of production peculiarities, the width and length of the abrasive may deviate from the values specified in the description by up to 5%.

*Owing to peculiarities of the anodizing process, shades of blanks may vary slightly.

Owing to peculiarities of the anodizing process, shades of blanks may vary slightly.

Recommendations for use: working with TSPROF sharpening oil is recommended.

WARNING!Bar requires careful work: do not press on the abrasive during sharpening (especially when sharpening the tip/ankle of the knife), do not allow to break off the plane of the blade and drop the bar on a hard surface.