Diamond sharpening stone TSPROF Alpha SD101, 100/80 (150 grit)

The Alpha 100/80 (150 grit) is designed for rough sharpening of the cutting edge.
TSPROF Alpha is a unique rubber-bonded diamond bar that works incredibly clean. Through a lot of experimentation, we were able to achieve the perfect combination of bonding agent and optimal concentration of abrasive particles. As a result, TSPROF Alpha work very clean and have the highest wear resistance.

The TSPROF Alpha diamond bars can easily handle all steels up to 70 HRC.

Each bar is thoroughly prepared and unopened, ensuring minimal variation in thickness within ±0.1mm.

Almost every bar is thoroughly prepared and unopened, ensuring minimal variation in thickness.

TheTSPROF Alpha abrasives are glued to an aluminum blank with 45° bevels for a secure fit in the abrasive holder. The blanks are anodized red*.

The blanks are packaged in individual blister packs.

Characteristics:

Length: 150 mm

Width: 25 mm

Thickness: 3 mm ± 0.15 mm

Binder: rubber

Because of production, abrasive width and length may deviate up to 5% from the values specified in the description
.

*Because of the anodizing process, the shades of the blanks may vary slightly.

Recommendations for use: working with TSPROF sharpening oil is recommended.

WARNING! The sharpening blocks require careful handling: do not press on the abrasive during sharpening (especially when sharpening the tip/point of a knife), do not allow the abrasive to come off the blade feed plane and do not drop the block on a hard surface.