VeAl single-sided diamond grit 7/5 100% (MS1)

Diamond bar on a metal bond (copper-tin, MS-1 grade). Volumetric content of diamonds in the bar 100% with a uniform distribution throughout the volume. Working layer of abrasive 3,5 mm ±0,3 mm. The bond contains: diamond powder, copper, tin and silicon carbide filler. It is designed for sharpening knives made of any steel with hardness up to 70 HRC.

The 7/5 sharpening stone is designed for finishing the cutting edge.

Characteristics:

Length: 150 mm

Width:25 mm

Thickness: 7 mm

Binding: MS-1

Grain: 7/5 microns

Because of production peculiarities, the width and length of the abrasive may deviate from the values specified in the description by up to 5%.

Recommendations for use: it is recommended to work with oil (coolant), it is also possible to work dry.

WARNING!Bar requires careful work: do not press on the abrasive during sharpening (especially when sharpening the tip/ankle of the knife), do not allow to break off the plane of the blade and drop the bar on a hard surface.