TSPROF Kadet Pro sharpening set, Version T

The TSPROF Kadet® Pro knife sharpening system, version T is all about keeping your knives perfectly sharp wherever you go. The universal clamps allow you to sharpen both compact folding knives and solid hunting knives.

The swivel mechanism of the TSPROF Kadet Pro, version T, helps to maintain the same sharpening angle on both sides of the knife. The permissible error when turning the frame is 0.4°. After turning the frame over, the lever locks the frame with the clamps in place. By turning the lift handle, the swivel assembly moves smoothly around the virtual center where the cutting edge of the knife is located. The arc stand is made from a single piece of aluminum and is integrated with a rack and pinion rack and pinion elevator. A locking lever, once the desired angle has been adjusted, allows the pivot assembly to be securely locked in place.

The T version is available without anodizing, visually emphasizing the technological nature of the device. T stands for technologically advanced.

The TSPROF Kadet Pro, version T has everything you need for the best sharpening experience: the blade swivel mechanism, the possibility to set any angle from 10.5° to 28.5°, the rigid construction and absolute precision in every detail.

The TSPROF Kadet Pro frame, version T is compatible with all clamps from the Profile K03 sharpening system: fillet, single, double and small universal sharpening table.

The TSPROF Kadet Pro, version T can be easily disassembled and folded for storage or transportation. The weight of 2100 g makes the sharpener mobile and provides sufficient stability when sharpening.

The TSPROF Kadet Pro sharpening set, version T, allows you to start sharpening knives without a long choice of abrasives. The kit already comes with 5 TSPROF diamond plates® in different grits, from Extra Coarse to Very Fine. These plates do not require soaking or the use of oil and water.

Because of the peculiarities of production, the width and length of the abrasive may deviate from the values indicated in the description up to 5%.

WARNING Bar requires careful handling: do not press on the abrasive during sharpening (especially when sharpening the tip/ankle of a knife), do not break off the blade feed plane and do not drop the bar on a hard surface.

Characteristics:

Bevel thickness: up to 7 mm

Knife blade length: up to 300 mm

Knife blade width: up to 40 mm

Minimum sharpening angle: 10.5°

Maximum sharpening angle: 28°

Compatible with abrasives lengths: 10 to 160 mm.

Compatible with abrasives thickness: 3 to 15 mm.

Weight: 2100g

TSPROF Kadet Pro Version T:

• • Set of TSPROF diamond inserts (5 pcs.): 1 pcs.
  • Device: 1 piece

.

• TSPROF Kadet clamp: 2 pcs.
• Abrasive holder: 1 pc.
• Stopper, 6 mm: 1 pc.
• L-shaped key: 2 mm
• .
• L-shaped wrench: 4 mm
• .