Товар
TSPROF Smart sharpening stone, CS-6, F600
In Stock
Description
Ceramic-bonded silicon carbide stones, without blank. Silicon carbide is a versatile abrasive for sharpening a wide range of steels, including powder steels, with hardnesses above 60 HRC. Works with water, requires soaking. The F600 stone is designed for basic sharpening.
Characteristics:
Material: silicon carbide
Stone size: 150x25x6 mm.
.
The stones are supplied without a blank and fit perfectly into the standard holders of the Profile K03 and Blitz sharpeners. For a better grip in the holder, it is recommended to glue on the blank. Be sure to level the stone on silicon carbide powder before use.
. Recommendations for work: Soak in water, work with water.
Because of the peculiarities of production, the width and length of the abrasive may have deviations from the values specified in the description up to 5%.
.
Scuffs and light white stains are allowed on the working surface of the stone. They do not affect the work of the abrasive. Small chips are allowed, which do not affect the working surface of the stone.
Small chips are allowed.
Warning! Bar requires careful work: do not put pressure on the abrasive during sharpening (especially when sharpening the tip/point of a knife), do not allow the abrasive to come off the plane of the blade and do not allow it to fall on a hard surface. Bar requires careful work: do not put pressure on the abrasive during sharpening (especially when sharpening the tip/point of a knife).
[wpcc-iframe width="1280" height="720" src="https://www.youtube.com/embed/Yv3Gx5MqQkA?feature=oembed" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen="" title="People's knife "Vector" from PP Kizlyar. New stones for sharpening, under the microscope."]
- Description
Ceramic-bonded silicon carbide stones, without blank. Silicon carbide is a versatile abrasive for sharpening a wide range of steels, including powder steels, with hardnesses above 60 HRC. Works with water, requires soaking. The F600 stone is designed for basic sharpening.
Material: silicon carbide
Stone size: 150x25x6 mm.
.
The stones are supplied without a blank and fit perfectly into the standard holders of the Profile K03 and Blitz sharpeners. For a better grip in the holder, it is recommended to glue on the blank. Be sure to level the stone on silicon carbide powder before use.
.
Recommendations for work:
Soak in water, work with water.
Because of the peculiarities of production, the width and length of the abrasive may have deviations from the values specified in the description up to 5%.
.
Scuffs and light white stains are allowed on the working surface of the stone. They do not affect the work of the abrasive. Small chips are allowed, which do not affect the working surface of the stone.
Small chips are allowed.
Warning! Bar requires careful work: do not put pressure on the abrasive during sharpening (especially when sharpening the tip/point of a knife), do not allow the abrasive to come off the plane of the blade and do not allow it to fall on a hard surface. Bar requires careful work: do not put pressure on the abrasive during sharpening (especially when sharpening the tip/point of a knife).
[wpcc-iframe width=»1280″ height=»720″ src=»https://www.youtube.com/embed/Yv3Gx5MqQkA?feature=oembed» frameborder=»0″ allow=»accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share» referrerpolicy=»strict-origin-when-cross-origin» allowfullscreen=»» title=»People’s knife «Vector» from PP Kizlyar. New stones for sharpening, under the microscope.»]