Товар

TSPROF aluminum blank, with adhesive backing

SKU TS-MS2000930
4,43 $

In Stock

Description

Description
TSPROF aluminum blank, with adhesive backing
All description
Aluminum blank, designed for sticking stones, leather or abrasive paper and fixing it in the abrasive holder. Due to the presence of special notches, the stones on the aluminum blank will be rigidly fixed in the abrasive holder. Aluminum blanks give additional strength and rigidity compared to plastic blanks.

The blank has a special adhesive coating. The main feature of this coating is the use of elastic acrylic polymers with closed cells as a base. They allow instant fixation of stones or skin on the blank, while having exceptional bonding strength. This coating shows high resistance to ultraviolet radiation, moisture, salts, solvents and temperature.

Size of the form: 160 x 25 mm, thickness 3 mm.

Supplied in a blister.

Instructions for use:

  • Optimal working temperature of bonding for 3M coating is 18-40 degrees. The bonded surface of the abrasive should be degreased beforehand (with alcohol, nitro paint solvent, acetone), and then air-dried for 10-15 minutes.
  • Glued surfaces of Boride stones and wooden bars before degreasing to be treated with sandpaper with grit P 70-120.Remove the protective film from the form. Apply the adhesive surface of the abrasive to the adhesive layer of the tape. Press the glued surfaces with a weight of 5-10 kg and wait 10-15 minutes. It is allowed to roll the glued parts with a roller.
  • It is recommended to use glued abrasive not earlier than 24 hours after installation works.
All Description