Profile abrasives are suitable for sharpening a wide range of steels, including hard, powder steels above 60 HRC. This set will be sufficient for all types of work, from deburring to final grinding. Narrow stones are more suitable for sharpening S-shaped RC, concave blade and smaller cutting tools.

The set includes 5 stones on aluminum blanks with 45° bevels.

Size of stones: 150×11×6mm.
Grit: 120, 220, 400, 600, 1000 grit.
Grain: 120, 220, 400, 600, 1000 grit.
Material: silicon carbide
Binding: ceramic

Because of the peculiarities of production, the width and length of the abrasive may have deviations from the values specified in the description up to 5%.

Scuffs and light white stains are allowed on the working surface of the stone. They do not affect the work of the abrasive. Small chips are allowed, not affecting the working surface of the stone.

Small chips are allowed.

Recommendations for work: Soak in water, work with water.

The color of the abrasive stones may vary from greenish to dark gray. This is not a defect and does not affect the quality of the abrasive.

WARNING. Brushes require careful work: do not press on the abrasive during sharpening (especially when sharpening the tip/ankle of the knife), do not allow to break off the plane of the blade feed and do not drop the brush on a hard surface.