Sharpening stones TSPROF Profile CS, on blanks (5 pcs)

Set of abrasive stones Profile. The set includes 5 abrasives on aluminum blanks. Profile knife sharpening abrasives are universal stones made of silicon carbide, which are suitable for sharpening most steel grades. The stones are versatile and suitable for sharpening a wide range of steels, including hard, powder steels above 60 HRC.

The set of stones for sharpening Profile contains abrasives of different grits: from 120 to 1000 grit. Such a set will be enough for all kinds of work, from skinning to final grinding.

Characteristics:

Material: silicon carbide

Stone size: 150x25x6 mm

Size with blank: 160x25x9 mm

Number in the set: 5 pieces

Grit (FEPA, grit): F120, F220, F400, F600, F1000

Because of peculiarities of production, width and length of the abrasive may have deviations from the values specified in the description up to 5%.

Scuffs and light white stains are allowed on the working surface of the stone. They do not affect the work of the abrasive. Small chips are allowed, not affecting the working surface of the stone.

The color of abrasive stones can vary from greenish to dark gray. This is not a defect and does not affect the quality of the abrasive performance.
The color of the abrasive bar may vary from greenish to dark gray.

Recommendations for use: Soak in water, work with water.

Attention! The brushes require careful work: do not press on the abrasive during sharpening (especially when sharpening the tip/ankle of the knife), do not allow tearing off the plane of the blade and falling of the bar on a hard surface.