Sharpening stone TSPROF Profile CS F120, on the blank

Stone size: 25x6x152 mm.
Grit: F120
Material: silicon carbide

Because of production peculiarities, width and length of the abrasive may have deviations from the values specified in the description up to 5%.

Scuffs and light white stains are allowed on the working surface of the stone. They do not affect the work of the abrasive. Small chips are allowed, not affecting the working surface of the stone.

Small chips are allowed.

Recommendations: soak in water, work with water. You can work with oil, the ceramic bond will not be affected by oil. The stones are quite versatile and are suitable for sharpening a wide range of steels, including hard, powder steels with hardness above 60 HRC.

The color of the abrasive stones may vary from greenish to dark gray. This is not a defect and does not affect the performance of the abrasive.

WARNING!Bar requires careful work: do not put pressure on the abrasive during sharpening (especially when sharpening the tip/ankle of the knife), do not allow to break off the plane of the blade and drop the bar on a hard surface.