Товар
Set of diamond stones with three-layer coating (4 pcs)
Pre-order 14 days
Длина абразива: 150 mm
Ширина абразива: 20 mm
Толщина абразива (без бланка): 3 mm
Набор: Yes
All Features- Description
- Features
All description
Set of diamond stones with three-layer spraying (4 pcs.). The set is designed for rough roughing. Bars are made on galvanic bonding. They provide intensive metal removal and can be used for the cutting edge of the knife, which has significant damage (chips, gouges, etc.). They work noticeably more aggressively than organic and metal-bonded bars with similar grain size and are practically grease-free. This is achieved due to protruding diamond grains, while in metal and organic bonds diamond grains are embedded in the binder and mixed with it. The bar contains triple diamond sputtering. The diamond layer is located on both sides of the bar, with the same grain size on each side. The concentration of diamonds in the layer is 100%. The geometry of the working plane on both sides is even, the bar does not need to be leveled, the diamond layer is opened during work. The set of diamond bars is supplied in a nylon case.
Characteristics:
Length:150 mm
Width:20 mm
Height:3 mm
Powder granularity (microns): 28/20, 50/40, 80/63, 100/80.
Powder grade: AC15
Because of peculiarities of production, width and length of abrasive may have deviations from the values specified in the description up to 5%.
Recommendations for use: before starting work moisten the diamond layer of the bar with water. In the process of sharpening periodically rinse the diamond layer with clean warm water with a brush, do not allow salting. It is not intended to work with oil. After stopping work, clean off dirt, rinse in warm water. Store in a dry place.
Attention! The brushes require careful work: do not press on the abrasive during sharpening (especially when sharpening the tip/ankle of the knife), do not allow tearing off the plane of the blade and falling of the bar on a hard surface.
| Abrasive length | 150 mm | Abrasive width | 20 mm |
| Abrasive thickness (without blank) | 3 mm | Set | Yes |
| Used coolant | Water | Abrasive material | Artificial diamonds |
| Binder | Galvanic | Grit | GOST 100/80, GOST 28/20, GOST 50/40, GOST 80/63 |