Товар
Diamond sharpening stone TSPROF Alpha SD15, 14/10 (1500 grit)
Pre-order 14 days
Упаковка: Blister
Длина абразива: 150 mm
Ширина абразива: 25 mm
Толщина абразива (без бланка): 3 mm ± 0.15 mm
All Features- Description
- Features
The Alpha 14/10 (1500 grit) is designed for pre-finishing of the cutting edge.
TSPROF Alpha is a unique rubber-bonded diamond bar that works incredibly clean. Through a lot of experimentation, we have managed to achieve the perfect combination of bonding agent and optimal concentration of abrasive particles. As a result, the TSPROF Alpha runs very clean and has the highest wear resistance.
.
The TSPROF Alpha diamond bars can easily handle all steels up to 70 HRC.
.
Each bar is thoroughly prepared and unopened, ensuring minimal variations in thickness within ±0.1mm.
The TSPROF Alpha abrasive blanks are glued to a 45° beveled aluminum blank for secure retention in the abrasive holder. The blanks are anodized in red color*.
.
The blanks are packaged in individual blister packs.
Characteristics:
Length: 150 mm
Width:25 mm
Thickness: 3 mm ± 0.15 mm
Bonding: rubber
Because of production, the width and length of the abrasive may deviate up to 5% from the values specified in the description.
*Owing to the peculiarities of the anodizing process, the shades of the blanks may vary slightly.
Recommendations for use: working with TSPROF sharpening oil is recommended.
WARNING!Bar requires careful work: do not press on the abrasive during sharpening (especially when sharpening the tip/ankle of the knife), do not allow to break off the plane of the blade and drop the bar on a hard surface.
If a parasitic risk appears during sharpening, we recommend rubbing the abrasive on a frosted glass with water.
| Packaging | Blister | Abrasive length | 150 mm |
| Abrasive width | 25 mm | Abrasive thickness (without blank) | 3 mm ± 0.15 mm |
| Form | Got it | Set | Yes |
| Used coolant | Oil | Abrasive material | Artificial diamonds |
| Binder | Rubber (rubber) | Grit | GOST 14/10 |